The sbtool Perl script of Stefan Arts provides a nice basic setup for accessing the Sunny Beam under Linux. But the Perl solution has some drawbacks: it is quite complex to set up and the codebase, with low-level hex-manipulations, is rather complex to extend, at least for an occasional Perl-developer like me...
With this in mind I translated the sbtool into C language and put it on sourceforge:
http://sourceforge.net/projects/sunnybeamtool/The basic functionalities are included, but additional feedback, testing and extensions are welcome. Of course use at your own risk ! :-).
$ sudo ./sunnybeamtool
Dev #6: 1587 - 002D -SMA Technologie AG -
Serial Number: 00024383
pac: 0.00 W
e-today: 12.37 kWh
e-total: 1551.83 kWh
$ sudo ./sunnybeamtool -lThis commandline is much easier and cleaner than running the full blown complex Sunny Data Control application under windows.
Dev #6: 1587 - 002D -SMA Technologie AG -
Serial Number: 00024383
pac: 0.00 W
e-today: 12.37 kWh
e-total: 1551.83 kWh
today:
...
2009-06-11 13:00:00: 756 W
2009-06-11 13:10:00: 888 W
2009-06-11 13:20:00: 569 W
2009-06-11 13:30:00: 205 W
...
last month:
...
2009-06-07: 11.790 kWh
2009-06-08: 10.060 kWh
2009-06-09: 8.480 kWh
2009-06-10: 12.370 kWh
If your Sunny Beam doesn't respond to the USB-communication, try this: unplug the USB cable, switch a few times between daily graph and monthly graph, go to the menu and select 'exit', plug the USB cable. This should 'unfreeze' the USB buffer of the Sunny Beam. I never had to remove the batteries from my Sunny Beam device during all my experiments.
If you're still having trouble, send the output of 'sudo sunnybeamtool -l -v' in your bug-reports on sourceforge.
Other background info: I kept the libusb approach, as this allows the application to run in user mode, outside of the kernel. The development is done wih Netbeans 6.5 and Subversion as development platform.
